Select the Time Display Format on an ATR480

Customize how the time is displayed on your Acroprint ATR480 Totalizing Time Recorder by choosing between standard (AM/PM) or military (24-hour) format.

Button Functions

The 1-6 keys on top of the clock serve as function keys in programming mode. The functions are printed on the card door above the column numbers. To enter programming mode, move the black set switch found below the #1 button from Run to Prog.

Button	Function	Purpose
1	+	Press 1 to increase the set value by 1.
2	-	Press 2 to decrease the set value by 1.
3	Enter	Press 3 to confirm the set value.
4	Back	Press 4 to go to the previous setting.
5	Cancel	Press 5 to cancel the set value.
6	Mode	Press 6 to move to the next menu.

To select the minute format on the ATR480:

1. Open the front cover using the key.
2. Move the black Set switch found under the function keys from Run to Prog (to the right) to enter programming mode.
3. Press button 3 (Enter) to enter Mode ES00 (Time & Date Settings). Cycle through modes by pressing button 6 (Mode).
4. Press button 3 (Enter) three times to navigate to Code 04 (Time Display Format). The code is located on the lower left of the screen.
5. Press button 1 (+) or 2 (-) to select between military or standard time.
   • 12: Standard time.
   • 24: Military time.
6. Press button 3 (Enter) to confirm the selection. The device will move to Code 05 (Daylight Savings Time).
7. If you are done, move the Set switch from Prog to Run (to the left) and replace the cover.