Set the Date (Year, Month, Day) on an ATR480

Set the date on your Acroprint ATR480 Totalizing Time Recorder by adjusting the year, month, and day to ensure accurate tracking.

Button Functions

The 1-6 keys on top of the clock serve as function keys in programming mode. The functions are printed on the card door above the column numbers. To enter programming mode, move the black set switch found below the #1 button from Run to Prog.

Button	Function	Purpose
1	+	Press 1 to increase the set value by 1.
2	-	Press 2 to decrease the set value by 1.
3	Enter	Press 3 to confirm the set value.
4	Back	Press 4 to go to the previous setting.
5	Cancel	Press 5 to cancel the set value.
6	Mode	Press 6 to move to the next menu.

To set the year, month, and day on the ATR480:

1. Open the front cover using the key.
2. Move the black Set switch found under the function keys from Run to Prog (to the right) to enter programming mode.
3. Press button 3 (Enter) to enter Mode ES00 (Time & Date Settings). Cycle through modes by pressing button 6 (Mode).
4. The device should be on Code 01 (Year). The code is located on the lower left of the screen. Cycle through codes by pressing button 3 (Enter) button.
5. Press button 1 (+) or 2 (-) to increase or decrease the year setting.
6. Press button 3 (Enter) to confirm the selection. The device will move to Code 02 (Month/Date).
7. Press button 1 (+) or 2 (-) to increase or decrease the month setting.
8. Press button 3 (Enter) to confirm the selection.
9. Press button 1 (+) or 2 (-) to increase or decrease the day setting.
10. Press button 3 (Enter) to confirm the selection. The device will move to Code 03 (Time).
11. If you're done, move the set switch from Prog to Run (to the left) and replace the cover.