Set the Time on an ATR480 Follow
Set the correct time on your Acroprint ATR480 Totalizing Time Recorder using these simple steps to ensure accurate tracking for your records.
Button Functions
The 1-6 keys on top of the clock serve as function keys in programming mode. The functions are printed on the card door above the column numbers. To enter programming mode, move the black set switch found below the #1 button from Run to Prog.
Button | Function | Purpose |
1 | + | Press 1 to increase the set value by 1. |
2 | - | Press 2 to decrease the set value by 1. |
3 | Enter | Press 3 to confirm the set value. |
4 | Back | Press 4 to go to the previous setting. |
5 | Cancel | Press 5 to cancel the set value. |
6 | Mode | Press 6 to move to the next menu. |
To set the time on the ATR480:
- Open the front cover using the key.
- Move the black Set switch found under the function keys from Run to Prog (to the right) to enter programming mode.
- Press button 3 (Enter) to enter Mode ES00 (Time & Date Settings). Cycle through modes by pressing button 6 (Mode).
- Press button 3 (Enter) two times to navigate to Code 03 (Time). The code is located on the lower left of the screen.
- Press button 1 (+) or 2 (-) to increase or decrease the hour setting to the correct hour.
- Press button 3 (Enter) to confirm the selection.
- Press button 1 (+) or 2 (-) to increase or decrease the minute setting to the correct minute.
- Press button3 (Enter) to confirm the selection. The device will move to Code 04 (Time Display Format).
- If you are done, move the Set switch from Prog to Run (to the left) and replace the cover.