Select the Minute Print Format on an ATR480 Follow
Set the Minute Print Format to either 60-minute or decimal format on your Acroprint ATR480 Totalizing Time Recorder. This setting will affect all values including punch times.
Button Functions
The 1-6 keys on top of the clock serve as function keys in programming mode. The functions are printed on the card door above the column numbers. To enter programming mode, move the black set switch found below the #1 button from Run to Prog.
Button | Function | Purpose |
1 | + | Press 1 to increase the set value by 1. |
2 | - | Press 2 to decrease the set value by 1. |
3 | Enter | Press 3 to confirm the set value. |
4 | Back | Press 4 to go to the previous setting. |
5 | Cancel | Press 5 to cancel the set value. |
6 | Mode | Press 6 to move to the next menu. |
To select the minute print format on the ATR480:
- Open the front cover using the key.
- Move the black Set switch found under the function keys from Run to Prog (to the right) to enter programming mode.
- Press button 6 (Mode) once to navigate to ES01 (Pay Period Settings).
- Press button 3 (Enter) twice to enter Code 02 (Minute Print Format). The code is located on the lower left of the screen.
- Press button 1 (+) or 2 (-) to select between a decimal or 60-minute format.
- 00: 60-minute format
- 01: Decimal format
- Press button 3 (Enter) to confirm the selection. The device will move to Code 04 (Pay Period Cycle End).
- If you are done, move the Set switch from Prog to Run (to the left) and replace the cover.