search shadow

Menu

Articles in this section

See more

Enable or Disable Card Side Identification on an ATR480 Follow

Avatar
Kristina Donaldson
  • Updated

You can enable or disable card side identification on the Acroprint ATR Totalizing Time Recorder to detect which side of the timecard it is printing on.

Note:

  • Settings 10 thru 12 only appear after holding down the 3rd and 4th keys simultaneously while under Mode: ES00.

 

Button Functions

The 1-6 keys on top of the clock serve as function keys in programming mode. The functions are printed on the card door above the column numbers. To enter programming mode, move the black set switch found below the #1 button from Run to Prog.

ATR480_button_labels.png

 

ButtonFunctionPurpose
1+Press 1 to increase the set value by 1.
2-Press 2 to decrease the set value by 1.
3EnterPress 3 to confirm the set value.
4BackPress 4 to go to the previous setting.
5CancelPress 5 to cancel the set value.
6ModePress 6 to move to the next menu.

 

 

To enable or disable card side identification on the ATR480:

  1. Open the front cover using the key.
  2. Move the black Set switch found under the function keys from Run to Prog (to the right) to enter programming mode.
  3. Press button 3 (Enter) to enter Mode ES00 (Time & Date Settings). Cycle through modes by pressing button 6 (Mode).
  4. Press buttons 3 and 4 simultaneously to access Code 10 -12. The screen will flash "-- --" then return to ES00. 
  5. Press button 3 (Enter) until you reach Code 12 (Card Side Identification). The code is located on the lower left of the screen.
  6. Press button 1 (+) or 2 (-) to enable or disable card side (back/back) identification.
    • 0: Disable the feature.
    • 1: Enable the feature.
  7. Press Enter to confirm the selection. The device will move to programming Mode ES01 (Pay Period Settings).
  8. If you are done, move the Set switch from Prog to Run (to the left) and replace the cover.

Related articles