Configure Column Shifting or Set the In-Out Schedule on Your ATR120r Time Recorder Follow
Although this product has been discontinued, we have retained this documentation for your reference. Content is retained for reference purposes only and may no longer be applicable. Feel free to explore our other available products at Acroprint.com.
Automatic Column Shifting allows you to schedule shifts on your Acroprint ATR120r Electronic Time Recorder. Set up to 12 scheduled shifts, moving the printout to the right, by specifying the time (hours and minutes) and days the column shifts should occur. Automatic column shift settings are only available if No Pay Period/Work Mode is set.
Button Functions
The In-Out buttons on top of the clock serve as function keys in programming mode. The functions are printed on the card door above the column numbers. To enter programming mode, move the switch found on the back of the clock from Run to Prgm.
Button | Function | Purpose |
IN1 | + | Press IN1 to increase the set value by 1. |
OUT1 | - | Press OUT1 to decrease the set value by 1. |
IN2 | Enter | Press IN2 to confirm the set value. |
OUT2 | Back | Press OUT2 to go to the previous setting. |
IN3 | Clear | Press IN3 to cancel the set value. |
OUT3 | Mode | Press OUT3 to move to the next menu. |
To set automatic column shifts on the ATR120r:
- Move the Set switch on the back of the case from Run to Prgm to enter programming mode.
- Press OUT3 (Mode) until you reach Mode B003 (In-Out Schedule). Cycle through modes by pressing button OUT3 (Mode).
- Press IN2 (Enter) to enter the first column change (01).
- Press IN1 (+) or OUT2 (-) to edit the Hour.
- Press In2 (Enter) to confirm the selection.
- Press IN1 (+) or OUT2 (-) to edit the Minute.
- Press In2 (Enter) to confirm the selection.
- Set the days of the week for the column shift.
- Press IN3 (Clear) to set the column change for every day of the week.
- Press OUT2 (-) to cancel the selected (flashing) day.
- Press IN1 (+) to add a day that has been deleted.
- Press IN2 (Enter) to continue advancing through each day of the week.
- Press IN1 (+) or OUT2 (-) to select the print column:
- 00 01
- 00 02
- 00 03
- 00 04
- 00 05
- 00 06
- Press In2 (Enter) to set the Print Column and go to the next Column change.
- Repeat steps 4 - 10 for each additional column change.
- If you are done, move the Set switch from Prgm to Run.