Adjust the Print Position on Your ATR120r Time Recorder Follow
Although this product has been discontinued, we have retained this documentation for your reference. Content is retained for reference purposes only and may no longer be applicable. Feel free to explore our other available products at Acroprint.com.
Adjust the print position to ensure your Acroprint ATR120r Electronic Time Recorder prints exactly where you want it. Increasing the value from 00 to 09 moves print up a total of 6mm. Decreasing the value moves the print down. “5” is the Factory Default. This article explains walks through how to fine-tune the vertical (up or down) print position.
Button Functions
The In-Out buttons on top of the clock serve as function keys in programming mode. The functions are printed on the card door above the column numbers. To enter programming mode, move the switch found on the back of the clock from Run to Prgm.
| Button | Function | Purpose |
| IN1 | + | Press IN1 to increase the set value by 1. |
| OUT1 | - | Press OUT1 to decrease the set value by 1. |
| IN2 | Enter | Press IN2 to confirm the set value. |
| OUT2 | Back | Press OUT2 to go to the previous setting. |
| IN3 | Clear | Press IN3 to cancel the set value. |
| OUT3 | Mode | Press OUT3 to move to the next menu. |
To set the vertical printing position on the ATR120r:
- Move the Set switch on the back of the case from Run to Prgm to enter programming mode.
- Press OUT3 (Mode) to enter Mode B000 (Time & Date Settings). Cycle through modes by pressing button OUT3 (Mode).
- Press IN2 (Enter) until you reach Code 06 (Vertical Printing Position). The display will begin to flash.
- Press IN1 (+) or OUT2 (-) to edit the printing position (0-9).
- Press In2 (Enter) to confirm the selection. The device will move to programming code 07 (Keyboard Beep).
- If you are done, move the Set switch from Prgm to Run.