Setting the Day Change on Your ATR120r Time Recorder Follow
Although this product has been discontinued, we have retained this documentation for your reference. Content is retained for reference purposes only and may no longer be applicable. Feel free to explore our other available products at Acroprint.com.
Adjust the Day Change time to set when a new workday begins on your Acroprint ATR120r Electronic Time Recorder. This is useful if your employees work past midnight (the default setting) and you need their punches to appear on one day.
Button Functions
The In-Out buttons on top of the clock serve as function keys in programming mode. The functions are printed on the card door above the column numbers. To enter programming mode, move the switch found on the back of the clock from Run to Prgm.
Button | Function | Purpose |
IN1 | + | Press IN1 to increase the set value by 1. |
OUT1 | - | Press OUT1 to decrease the set value by 1. |
IN2 | Enter | Press IN2 to confirm the set value. |
OUT2 | Back | Press OUT2 to go to the previous setting. |
IN3 | Clear | Press IN3 to cancel the set value. |
OUT3 | Mode | Press OUT3 to move to the next menu. |
To set the day change (hour and minute) on the ATR120r:
- Move the Set switch on the back of the case from Run to Prgm to enter programming mode.
- Press OUT3 (Mode) to enter Mode B000 (Time & Date Settings). Cycle through modes by pressing button OUT3 (Mode).
- Press IN2 (Enter) until you reach Code 05 (Day Change). The hour will begin to flash on the display.
- Press IN1 (+) or OUT2 (-) to edit the hour.
- Press In2 (Enter) to confirm the selection. The minute will begin to flash.
- Press IN1 (+) or OUT2 (-) to edit the minute.
- Press In2 (Enter) to confirm the selection. The device will move to programming code 06 (Vertical Printing Position).
- If you are done, move the Set switch from Prgm to Run.