Set a Password on Your ATR120r Time Recorder Follow
Although this product has been discontinued, we have retained this documentation for your reference. Content is retained for reference purposes only and may no longer be applicable. Feel free to explore our other available products at Acroprint.com.
Setting a password on your Acroprint ATR120r Electronic Time Recorder helps secure access to Program Mode. When a password is set, you will see a row of dashes on the screen when attempting to enter Program Mode. You will need to enter the correct password to access the clock menus. If you misplace your password, contact us to assist you in resetting your password.
Button Functions
The In-Out buttons on top of the clock serve as function keys in programming mode. The functions are printed on the card door above the column numbers. To enter programming mode, move the switch found on the back of the clock from Run to Prgm.
Button | Function | Purpose |
IN1 | + | Press IN1 to increase the set value by 1. |
OUT1 | - | Press OUT1 to decrease the set value by 1. |
IN2 | Enter | Press IN2 to confirm the set value. |
OUT2 | Back | Press OUT2 to go to the previous setting. |
IN3 | Clear | Press IN3 to cancel the set value. |
OUT3 | Mode | Press OUT3 to move to the next menu. |
To set the menu password on the ATR120r:
- Move the Set switch on the back of the case from Run to Prgm to enter programming mode.
- Press OUT3 (Mode) to enter Mode B000 (Time & Date Settings). Cycle through modes by pressing button OUT3 (Mode).
- Press IN2 (Enter) until you reach Code 08 (Menu Password). The display will begin to flash.
- Press IN1 (+) or OUT2 (-) to edit the first digit of the password.
- Press In2 (Enter) to confirm the selection.
- Press IN1 (+) or OUT2 (-) to edit the second digit.
- Press In2 (Enter) to confirm the selection.
- Press IN1 (+) or OUT2 (-) to edit the third digit.
- Press In2 (Enter) to confirm the selection.
- Press IN1 (+) or OUT2 (-) to edit the fourth digit.
- Press In2 (Enter) to confirm the selection. The device will move to programming code B000.
- If you are done, move the Set switch from Prgm to Run.
Please note: 00 00 is the Factory Default and indicates no password.