Getting Started with Your ATR120r Electronic Time Recorder Follow
Although this product has been discontinued, we have retained this documentation for your reference. Content is retained for reference purposes only and may no longer be applicable. Feel free to explore our other available products at Acroprint.com.
Before You Start
Please read this article thoroughly before operating your time clock to avoid damage and to ensure proper operation.
What’s In the Box
Unpack clock. Inspect clock for any damages that may have occurred during shipment.
Check the box contents for any missing items (see list of contents below). If any damages are found or if any parts are missing please contact Acroprint Customer Service at (800) 334-7190.
- ATR120 Time Recorder
- (2) Clock Cover Keys on Key Ring
- 13vDC 1000mA Switching Power Supply
- User Manual
- Extended Service Plan Order Form (06-0343-000)
- (25) Sample ATR121 Weekly/Bi-Weekly Time Cards
- Clock Wall Mounting Template
- (3) Mounting Screws
- (3) Plastic Wall Anchors
Clock Overview
LCS Display
Button Functions
The In-Out buttons on top of the clock serve as function keys in programming mode. The functions are printed on the card door above the column numbers. To enter programming mode, move the switch found on the back of the clock from Run to Prgm.
Button | Function | Purpose |
IN1 | + | Press IN1 to increase the set value by 1. |
OUT1 | - | Press OUT1 to decrease the set value by 1. |
IN2 | Enter | Press IN2 to confirm the set value. |
OUT2 | Back | Press OUT2 to go to the previous setting. |
IN3 | Clear | Press IN3 to cancel the set value. |
OUT3 | Mode | Press OUT3 to move to the next menu. |
Switches on the Back of the Case
The switches on the back of the clock serve the following functions:
Switch | Purpose |
Reset Button | Restarts the clock (same as powering off and back on) |
Prgm Switch | Run - normal use. Move to "Prgm" to enter Program Mode and access the clock settings. |
On/Off Switch | Turn the clock memory battery On or Off. Move to "On" to enable battery backup of clock settings. If the switch is moved to "Off" and the clock is unplugged for a few minutes some user settings may be lost. The purpose of the switch is to save battery power for memory backup when the clock is not being used. |
Power Connector/Bell Connections on the Back of the Case
Operational Battery Pack
The ATR120 with Operational Battery Pack (01-0212-002) is available for customers that require backup power . The Battery Pack (58-0109-001) is a 9 cell NiCad (Nickel Cadmium) battery pack that charges when the ATR120 is plugged in. In the event of a power failure the clock will instantly switch to battery power without any interruption in service. The operational battery pack allows for full operation of the clock. The battery pack is available as an add-on to standard clocks but must be factory installed or installed by a certified Acroprint dealer.
Battery Pack Specs (new battery)
Voltage: | DC 10.8v |
Capacity: | 1000mAh |
Standby mode: | ~40 Hr Reserve Power |
Fully charged: | The clock has been tested for over 3 Hrs and 6,000 continuous punches. |
Note: Actual battery life depends on many factors such as battery age, temperature, discharge history, etc., and can vary greatly depending on these factors. The ATR120 should be plugged in for at least 12 hours to fully charge the battery pack before initial use