M150MC4 Leading Zero Settings Follow
Customizing the leading zeros to tailor your printouts. You can decide whether to include leading zeros for a cleaner look.
When you are setting a digit or an option on the display, flashing means that it is ready to be changed. You must press SELECT until you reach the desired digit or option. Then press SET to lock the desired value in place. Printing is always disabled while settings are being changed. Once the final SET has been completed in any given operation, printing is enabled.
Leading Zeros Options
| Option | Leading Zero | Print Example |
| 1 | Zero Disabled | JAN 1 PM 3:00 |
| 2 | Zero Enabled | JAN 01 PM 03:00 |
To enable or disable leading zeros on the M150MC4:
- Unlock the unit and remove the cover. Refer to our Getting Started article for how to Open the Unit.
- Press SELECT until the arrow
is under LEADING ZERO. The flashing digit indicates "Leading Zero Option".
- To enable leading zeros, press CHANGE until the option is "2" (Zero Enabled).
- To disable leading zeros, press CHANGE until the option is "1" (Zero Disabled).
- Press SET until the unit returns to normal operation mode.
- Replace the cover and lock the unit. Refer to our Getting Started article for how to Close the Unit.