M150MC4 Print Length Settings: Font Size

The default print length on the M150MC4 is set to 4. You can select from six font sizes (1-6): 1 being the smallest size and 6 being the largest. 

Please note, if the font size is too large to print, the font will revert to a smaller size before printing.

When you are setting a digit or an option on the display, flashing means that it is ready to be changed. You must press SELECT until you reach the desired digit or option. Then press SET to lock the desired value in place. Printing is always disabled while settings are being changed. Once the final SET has been completed in any given operation, printing is enabled.

To change the print length on the M150MC4:

1. Unlock the unit and remove the cover. Refer to our Getting Started article for how to Open the Unit.
2. Press SELECT until the arrow points to PRINT LENGTH. The flashing digit indicates "Print Length Options". 
   

   

3. Press CHANGE until the display option matches your preferred print length.
4. Press SET until the unit returns to normal operation mode.
5. Replace the cover and lock the unit. Refer to our Getting Started article for how to Close the Unit.