M150MC4 Year Digits Settings Follow
Customizing the year format setting allows you to tailor your printouts. If you have programmed the unit to print the year, this setting allows you to choose either a 2-digit or 4-digit format for the year.
When you are setting a digit or an option on the display, flashing means that it is ready to be changed. You must press SELECT until you reach the desired digit or option. Then press SET to lock the desired value in place. Printing is always disabled while settings are being changed. Once the final SET has been completed in any given operation, printing is enabled.
Year Digit Options
Option | Year Digit Option | Print Example |
1 |
2 Digits ('24) | JAN 31 '08 AM 10:00 |
2 | 4 Digits (2024) | JAN 31 2008 AM 10:00 |
To set the printed year format on the M150MC4:
- Unlock the unit and remove the cover. Refer to our Getting Started article for how to Open the Unit.
- Press SELECT until the arrow
is under YEAR DIGIT. The flashing digit indicates "Year Digit Option".
- Press CHANGE until the displayed option matches your preferred Year Digit Option according to the chart above.
- To complete your selection, press SET until the unit returns to normal operation mode.
- Replace the cover and lock the unit. Refer to our Getting Started article for how to Close the Unit.