Set the Time on an M150 Time Recorder

Setting the time on the Acroprint M150 Time Recorder is as simple as pushing a lever, literally. You will need to remove the cover to access the lever to move the time forward. If the recorder is set slightly ahead of current time, then unplug it until it matches the correct time. Unless your recorder is equipped with continental hours, all PM hours on the time card will be printed underscored. 

Check out this video to see how to change the time or follow the steps below. 

To set the time:

1. Unplug the time recorder and remove the cover.
2. Push down and release the Black Minute lever (on the left side of the clock face) to set the correct time.
   

   

3. If the minute lever does not work, plug in the clock and wait for the minute hand to advance, then unplug the clock and try the lever again. Do not move the clock hands to set the time!
4. Replace the case cover, plug in the clock, and punch a card to verify the correct setting.

Important Note: Do not use the black lever on the right side of the device (If included with your model, it will be near the yellow day/date lever). This lever will ONLY update the printed hours and will not change the clock face.