Set the Month on an M150 Time Recorder

The month setting (if so equipped) MUST be manually reset every month on the Acroprint M150. If you notice the month is not printing clearly, turn the Month knob approximately 1/4 turn to align the month latch with the groove on the month wheel.

Please note that the date setting must be manually reset to the 1st of the month following any month with less than 31 days.

Check out this video to see how to change the month or follow the steps below. 

To set the month:

1. Unplug the time recorder and remove the cover.
2. Turn the Month knob (under the center of the clock face) counter-clockwise to select the correct month.
   

   

3. Replace the case cover, plug in the clock, and punch a card to verify the correct setting.