ES900 Features and Specifications

This article outlines the features and specifications of the ES900 Advanced 3-in-1 Time Recorder.

Note: Previous versions of this model included a feature for automatic synchronization using the atomic signal, facilitated by an attached antenna. Mentions of these features are indicated with a red asterisk (*).

Features

• Combines Time Recorder, Time Stamp, Numbering Machine – Multi-Purpose/Multi-Functions
• Quartz Time Recorder
• Digital LCD (Date, Hour, Minute, Day of the Week)
• Perpetual Calendar
• Dot-Matrix Printer
• Automatic Daylight Saving Time (DST)
• Automatic Date, Month Year Change to
  2099
• 4-way Print Activation
  • Automatic
  • Semi-Automatic
  • Manual
  • Combination
• Durable Snap-in Ribbon Cartridge
• Adjustable Print Positions
• Prints in 7 languages
• Prints Date
• Preset or Custom Comments
• 13 Preset Comments
• Selectable 4-Digit Year Imprint
• 12 or 24-Hour Format
• Regular Minute, Tenths, Twentieths, or Hundredths of an Hour
• Password Protection
• Built-in Battery Backup
• Wall or Desktop Mount
• *Atomic Synchronization Sets Time and Date Automatically*

Optional Features

• Time Table Program
• I-Mark™ Printing (Irregular Registration Mark)
• Program Internal Signal or Activate External Time Signal
• Built-in Buzzer
• Rechargeable Battery for Punching without AC Power

Specifications

• Dimensions:
  • 6.14" (w) x 7.13" (h) x 6.97" (d)
  • 156 (w) x 181 (h) x 177 (d) mm
• Weight: Approx. 4.0 lbs.
• Rating:
  • 120 VAC 50/60 Hz, 0.4 A
  • 220-240 VAC 50/60Hz 0.2 A
• Rating AC Adapter: I/P 120 VAC 60 Hz, O/P 12 V 2000mA Use only the supplied AC Adapter with this unit.
• Device Accuracy: Monthly accuracy +/- 15 seconds at ordinary temperatures.
• Calendar: Year up to 2099. Automatically adjusted to leap years, 31-day months and months with 30 or fewer days, and the days of the week.
• Printing System: Dot matrix
• Settings Backup: Internal backup batteries are included and store device settings only, in the event of a power outage, and are functional for approximately 3 years.
• Print at Power Failure: Approximately 200 print registrations or 24 hours
• Accuracy: ± 15 sec (at ordinary temperatures)
• Operating Temperature: -5° to +45°C, +25° to +113°F
• Operating Humidity: 20 to 80%, no condensation
• The unit operates normally at temperatures of 5°C (25°F) or below, but the print density and reaction of the liquid crystal display are inferior to those at normal temperature operation.

THIS PRODUCT IS FOR COMMERCIAL USE ONLY.

The time clock is an electrical device. In order to reduce the risk of fatal electrical shock and fire, basic safety precautions should be followed, including the following:

• Insert the power plug as far as it will go.
• Do not disassemble the unit.
• Do not modify the unit.
• Do not use any voltage of the power source other than designated.
• Do not share a single outlet with another plug.
• Do not damage, break, or modify the power cord.
• Do not put heavy objects on, pull, or forcefully bend the cord. These may damage the cord.
• Do not plug or unplug the unit with a wet hand.
• Do not place the unit on an uneven or tilted surface.
• Do not put a water-filled container or a metal object on top of the unit.
• Do not install the unit in a humid or dusty environment.
• Do not place the unit near a kitchen counter or humidifier.
• Do not yank the power cord to disconnect from the outlet. Hold the plug with your hand to do so, or the cord may be damaged.
• Do not insert or drop any other time card than specified into the slot.
• Do not come in contact with the print head.
• If any anomaly occurs, for example, heat or smoke is generated or an odor is emitted, unplug the unit immediately and contact your dealer for servicing.
• If foreign matter should get in the unit (including a piece of metal, water, or liquid), disconnect the plug from the outlet immediately and contact us.
• Remove the line cord plug from the outlet before transferring the unit, or it may damage the cord.
• If the unit should be dropped or the case is broken, unplug the unit and contact us.