ES900 Date Settings Follow
Setting the date on your clock is quick and easy, and it ensures your device is always up to date. If your date is correct, but you're needing to change the order it appears on the printout, refer to our Print Configuration article.
When you are setting a digit or an option on the display, flashing means that it is ready to be changed. You must press SELECT until you reach the desired digit or option. Then press SET to lock the desired value in place. Printing is always disabled while settings are being changed. Once the final SET has
been completed in any given operation, printing is enabled.
To set the year, month, and day on the ES900:
- Unlock the unit and remove the cover. Refer to our Getting Started article for how to Open the Unit.
- Press SELECT until the arrow
points to DATE. The Year will flash.
- Press CHANGE until the Year is correct.
- Press SET. The flashing will change from "Year" to "Month".
- Press CHANGE until the Month is correct.
- Press SET. The flashing will change from "Month" to "Date".
- Press CHANGE until the Date is correct.
- Press SET until unit returns to normal operation mode.
- Replace the cover and lock the unit. Refer to our Getting Started article for how to Close the Unit.