Replacing the Ink Ribbon on Your ATR120r Time Recorder Follow
Although this product has been discontinued, we have retained this documentation for your reference. Content is retained for reference purposes only and may no longer be applicable. Feel free to explore our other available products at Acroprint.com.
To replace the ink ribbon on your ATR120r Time Recorder:
- Open the top cover and press the OUT2 button. The print head will move to Column 4 to make it easier to remove the ribbon cartridge.
- If column shifts are programmed, the print head could move after 3 seconds and could pinch your fingers. To avoid this, move the print head to Col. 4 before sliding the programming switch to “Prgm”. This will prevent the print head from moving.
- Slide the programming switch to “Prgm”.
- Pull the ribbon holders towards you to unlatch the ribbon cartridge.
- Use the handle on top of the ribbon cartridge to pull it up and out of the clock.
- Blow any paper dust off the print head and from the inside of the clock using a can of compressed air. This could help prevent ribbon or card jams.
- Carefully insert a new cartridge, positioning the ribbon between the plastic ribbon guide and the stainless steel print shield.
- Push the cartridge down until it clicks into place.
- Turn the ribbon knob clockwise to remove any slack in the ribbon. Slide the program switch back to “Run”.