Getting Cloud Punch Time Clocks Connected Follow
There are two ways to connect your time clock to the Internet—via WI-FI or Ethernet. Both sets of instructions are listed below.
Connecting via WI-FI
To connect your time clock via a WI-FI, follow these steps:
- Once you have powered on your time clock, during setup, you will have the option to select network settings.
- Select WI-FI.
- A list of all WI-FI networks that the time clock detects will appear.
- Select the WI-FI network you want to connect to.
- If your WIFI network requires a password, enter the password.
- Tap join and the time clock will connect to your WIFI network using the credentials you supplied.
- You will receive a success notification once you are connected.
Connecting via Ethernet
To connect your time clock via ethernet, follow these steps:
- Once you have powered on your time clock, during setup, you will have the option to select network settings.
- Select ethernet.
- If the time clock has not connected via ethernet yet, the clock will display a confirmation page. Plug in your ethernet cable in the ethernet port located in the back of your time clock if you haven't yet.
- Once the ethernet connection is established, you will see a success notification. This can take a few moments.