M150MC4 Time Settings: Hour and Minute

This article applies to the displayed time, not the printed time. To adjust the print out, please see our Print Order article.

When you are setting a digit or an option on the display, flashing means that it is ready to be changed. You must press SELECT until you reach the desired digit or option. Then press SET to lock the desired value in place. Printing is always disabled while settings are being changed. Once the final SET has been completed in any given operation, printing is enabled. Remember to press SET until the unit returns to normal operation mode. To exit program mode anytime, press SET until the unit returns to normal operation mode.

To set the displayed hour and minutes on the M150MC4:

1. Unlock the unit and remove the cover. Refer to our Getting Started article for how to Open the Unit.
2. Press SELECT until the arrow points to TIME.
3. The Hour will flash to indicate that it can be changed.
   

   

4. Push CHANGE until the display indicates the desired hour.
5. Press SET to accept the hour setting. The flashing will change from Hour to Minute.
   

   

6. Press CHANGE to set to the desired minute.
7. Press SET. The "Second" will start to run from "00".
8. Press SET again until the display returns to normal operating mode.
9. Replace the cover and lock the unit. Refer to our Getting Started article for how to Close the Unit.