Select the Minute Format on Your ATR120r Time Recorder Follow
Although this product has been discontinued, we have retained this documentation for your reference. Content is retained for reference purposes only and may no longer be applicable. Feel free to explore our other available products at Acroprint.com.
Set the Minute Print Format to either 60-minute or decimal format on your Acroprint ATR120r Electronic Time Recorder. This setting will affect all values including punch times.
Button Functions
The In-Out buttons on top of the clock serve as function keys in programming mode. The functions are printed on the card door above the column numbers. To enter programming mode, move the switch found on the back of the clock from Run to Prgm.
Button | Function | Purpose |
IN1 | + | Press IN1 to increase the set value by 1. |
OUT1 | - | Press OUT1 to decrease the set value by 1. |
IN2 | Enter | Press IN2 to confirm the set value. |
OUT2 | Back | Press OUT2 to go to the previous setting. |
IN3 | Clear | Press IN3 to cancel the set value. |
OUT3 | Mode | Press OUT3 to move to the next menu. |
To select the minute format on the ATR120r:
- Move the Set switch on the back of the case from Run to Prgm to enter programming mode.
- Press OUT3 (Mode) twice to enter Mode b001 (Pay Period Settings). Cycle through modes by pressing button OUT3 (Mode).
- Press IN2 (Enter) until you reach Code 03 (minute Format). The screen will begin to flash.
- Press IN1 (+) or OUT2 (-) to select the minute format:
- 00 01: Standard Minutes (1/60th Hour), example: 10:10
- 00 02: Hundredths (1/100 Hour), example: 10.17
- 00 03: Twentieths (1/20 Min), example: 10.15
- 00 04: Tenths (1/10 Min), example: 10.1
- Press In2 (Enter) to confirm the selection. The device will move to programming code 04 (DST Start).
- If you are done, move the Set switch from Prgm to Run.