search shadow

Menu

Articles in this section

See more

ES700 Date Settings: Year, Month, and Day Follow

Avatar
Kristina Donaldson
  • Updated

Setting the date on your clock is quick and easy, and it ensures your device is always up to date. If your date is correct, but you're needing to change the way it appears on the printout, refer to our Print Order article. 

When you are setting a digit or an option on the display, flashing means that it is ready to be changed. You must press SELECT until you reach the desired digit or option. Then press SET to lock the desired value in place. Printing is always disabled while settings are being changed. Once the final SET has
been completed in any given operation, printing is enabled.

 

To set the displayed date on the ES700:

  1. Unlock the unit and remove the cover. Refer to our Getting Started article for how to Open Unit.
  2. Press SELECT until the arrow points to DATE. The Year will flash.

    A graphic of the time clock display showing the arrow icon pointing toward Date, the first 2 digits are surrounded by lines indicating blinking and are labeled as Year, the next digit is labeled as Month, the final set of digits is labeled as Date

  3. Press CHANGE until the Year is correct.
  4. Press SET. The flashing will change from "Year" to "Month".

    A graphic of the time clock display showing the arrow icon pointing toward time, the next center digit is surrounded by lines indicating blinking.

  5. Press CHANGE until the Month is correct.
  6. Press SET. The flashing will change from "Month" to "Date".

    A graphic of the time clock display showing the arrow icon pointing toward time, the final set of digits is surrounded by lines indicating blinking.

  7. Press CHANGE until the Date is correct.
  8. Press SET until unit returns to normal operation mode.
  9. Replace the cover and lock the unit. Refer to our Getting Started article for how to Close Unit.