TimeQplus V4 Badge Enrollment Remote Terminal

Enrolling employees with a badge can be done by following the instructions below.  This process allows employees to use a badge to clock in and out on the TQ600P or TQ600M terminals that’s connected to the software through the Flash Drive options.

1. Log into the TimeQPlus software.
2. Go to Employees and add a new employee. (See timeQplus User Guide for instructions.)
3. Click on the employee’s name >> locate Number >> enter the badge number.
4. Press Enter to save.
5. Go to Time Clock >> click on Flash Drive.
6. Connect the flash drive to the PC.
7. Move the employee to the Assigned Employees column and click Save.

TQ600 Clock:

1. Connect the Flash Drive to the left side of the clock.
2. Press Menu >> PenDrive Mng >> UpLoad User.
3. You will receive Copy Data Suc message.  ESC out of the menu options.
4. Remove the Flash Drive.

Downloading Punches – Payroll

1. Insert the Flash Drive into the TQ600 Clock.
2. Press Menu >> PenDrive Mng >> DwnLoad AttLog (You will receive Copy Data Suc when the data has downloaded to the flash drive successfully.)
3. ESC out of the menu options.
4. Remove the flash drive from the clock.
5. Connect the flash drive to the PC.
6. Log into the TimeQPlus software.
7. Click on Time Clock >> Flash Drive >> Import USB drive.
8. Select the attlog.dat file >> Import Selected Files.
9. Click Yes to Backup files.  Remove flash drive from the PC.

NOTE: Complete your payroll before deleting attlog file. 

Deleting attlog file:

Menu >> Options >> System Opt >> Del Attlogs